Engine And Transmission, Separating, Vehicles With Manual Transmission 02Q: Procedure

Courtesy of AUDI OF AMERICA, LLC

-- Remove the starter. Refer to STARTER .

-- Remove the bolts -1 and 2- and remove the bevel box bracket.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the transmission support.

Courtesy of AUDI OF AMERICA, LLC

-- Install the :T40013 on the transmission and close the retainer.

Courtesy of AUDI OF AMERICA, LLC

-- Engage the :VAS6100 with :10-222A/2 on the transmission lift hook.

-- Remove the bolts -1, 2, 5, 6, 7 and 8- connecting the transmission to the engine.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the transmission from the engine. Pay attention to the intermediate plate while doing so.