Timing Chain Cover, Removing And Installing, Engine With Two Camshaft Adjusters: Installing

Install in reverse order of removal and note the following:

• Replace the seals and O-rings after removal.

-- Coat the seals and the O-rings with engine oil.

• Seal installation position: smaller inner diameter outward.

-- Install the camshaft adjustment valves. Refer to CAMSHAFT ADJUSTMENT VALVE 1 -N205-, REMOVING AND INSTALLING .

Additional procedures depending on the model. Refer to TIMING CHAIN COVER, REMOVING AND INSTALLING [CNSB, CNTC, & CYFB] .