Overview - Muffler, Vehicles With Fwd: Notes
- Rear Muffler
- Original equipment as one unit with the rear muffler. If a repair is required replace each separately
- Removing and installing. Refer to MUFFLER, REMOVING AND INSTALLING .
- Separating point. Refer to EXHAUST PIPES/MUFFLERS, DISCONNECTING .
- Exhaust System, Installing without Tension. Refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .
- Bolt
- 20 Nm
- Bracket
- Retaining Loop
- Replace if damaged
- Rear Clamping Sleeve
- Before tightening, align the exhaust system without tension. Refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .
- Installation position. Refer to INSTALLATION POSITION FOR REAR CLAMPING SLEEVE .
- Tighten threaded connections evenly.
- Nut
- 20 Nm
- Bolt
- 20 Nm
- Bracket
- Retaining Loop
- Replace if damaged
- Center Muffler
- Original equipment as one unit with the rear muffler. If a repair is required replace each separately
- Removing and installing. Refer to MUFFLER, REMOVING AND INSTALLING .
- Separating point. Refer to EXHAUST PIPES/MUFFLERS, DISCONNECTING .
- Exhaust System, Installing without Tension. Refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .
- Retaining Loop
- Replace if damaged
- Bracket
- Bolt
- 20 Nm
- Retaining Loop
- Replace if damaged
- Trim
- For the tail pipes