Secondary Air Injection Solenoid Valve -N112-, Removing And Installing: Removing

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Loosen the hose clamp -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and push the left air duct pipe slightly to the left.

-- Disconnect the connector -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the connecting pipe -2- to do so push the locking ring on both sides together.

-- Remove the bolts -arrows- and remove the secondary air injection solenoid valve -3-.