Fuel Level Sensor 2 -G169-, Checking: Procedure

-- Move the front seats all the way forward.

-- Switch off the ignition.

-- Remove the rear bench seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .

-- Unclip the right sealing flange cover -1- at the tabs in direction of -arrows- using the :3409  .

Courtesy of AUDI OF AMERICA, LLC

VERSION 1: 

Courtesy of AUDI OF AMERICA, LLC

-- Unlock the connector safety catch and disconnect the connector -2- on the right sealing flange.

VERSION 2: 

Courtesy of AUDI OF AMERICA, LLC

-- Release the connector safety catch to disconnect the connector -1- on the right sealing flange.