Accelerator Pedal Position Sensors -G79- / -G185-, Removing And Installing: Removing

-- Remove The Steering Column Cover. Refer to STEERING COLUMN COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -2- from the accelerator pedal module, to do so press the release upward.

Fig 1: Accelerator Pedal Position Sensor -G79- / Accelerator Pedal Position Sensor 2 -G185- Component Location

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

-- Remove the accelerator pedal module -3- from the mounting.