LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S3 Premium Plus >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Mechanical Components (Brakes) -- (Sedan) >> 46 Mechanical Components >> Front Brakes >> Brake Shield, Removing And Installing >> Installing

Brake Shield, Removing And Installing: Installing

Install in reverse order of removal and note the following:

NOTE:

Clean the bolts and nuts before reusing.

Always replace self-locking nuts and bolts.

Always replace damaged nuts and bolts.

-- Clean the brake shield and the wheel hub.

-- Install the brake rotor. Refer to BRAKE ROTOR, REMOVING AND INSTALLING .

WARNING:

Risk of accident!

  • With the vehicle stationary, firmly press the brake pedal several times so that the brake pads in the operating condition properly sit in their respective position.
  • Make sure the brakes are working correctly before driving the vehicle for the first time.
scientia non olet · About LEMON Manuals