Brake Caliper, Replacing, RS 3, 1LF, 1LH And 1LU: Notes
NOTE:
Clean the bolts and nuts before reusing.
Always replace self-locking nuts and bolts.
Always replace damaged nuts and bolts.
NOTE:
In the following description the brake caliper is removed and replaced. The brake hose is removed.
Special tools and workshop equipment required
- Torque Wrench 1332 40-200Nm:VAG1332
- Brake Pedal Actuator:VAG1869/2 .
- Bleeder bottle from the Brake Charger/Bleeder Unit:VAS5234
- Plugs from the Assembly Part Set:5Q0 698 311