Mounting Bracket, Removing And Installing: Installing
Install in reverse order of removal and note the following:
NOTE:
Clean the bolts and nuts before reusing.
Always replace self-locking nuts and bolts.
Always replace damaged nuts and bolts.
-- Bring the mounting bracket with the installed brake pedal into the installation position.
NOTE:
Make sure that the wire for the accelerator pedal module is free and not pinched when inserting the mounting bracket.
Make sure that the mounting bracket sits in all stud bolts.
-- BRAKE PEDAL, ATTACHING TO BRAKE BOOSTER
-- Install the crash bolster. Refer to INSTRUMENT PANEL .
WARNING:
Risk of accident!
- Make sure the brakes are working correctly before driving the vehicle for the first time.