Vacuum, Creating With Hand Vacuum Pump

Special Tools And Workshop Equipment Required 

• Hand Vacuum Pump:VAS6213 

In certain situations, the vacuum can be created using a :VAS6213  instead of using the engine or a vacuum pump.

-- To do so, connect the :VAS6213  to the vacuum hose from the connection -B- to the :VAS6721  .

-- Open the shut-off valve -B-.

-- Create the vacuum using the :VAS6213  until a vacuum between 600 and 950 mbar is displayed on the :VAS6721  .

-- Then perform the relevant tests.