Check Valve, Removing And Installing: Removing

Vehicles with 1.2L/1.4L TFSI Engine 

-- Release the retainer -arrow- and remove the vacuum hose -1-.

-- Free up the vacuum hose on the air duct pipe -2-.

Vehicles With 1.8L/2.0L TFSI Engine 

-- Remove the engine cover. Refer to ENGINE COVER [CNSB, CNTC] / ENGINE COVER, REMOVING AND INSTALLING [CRUA, DEJA] .

-- Loosen the hose clamps -1 and 2- and remove the air duct pipe.

-- Disconnect the vacuum hose -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Press the release button on the vacuum hose -1- and remove the hose from the vacuum pump.

Vehicles With 1.6L/2.0L TDI Engine 

Courtesy of AUDI OF AMERICA, LLC

-- Remove the engine cover. Refer to ENGINE COVER [CNSB, CNTC] / ENGINE COVER, REMOVING AND INSTALLING [CRUA, DEJA] .

-- Free up the vacuum hoses -arrows-.

-- Loosen the hose clamps -1 and 2- and remove the air duct pipe.

-- Release the retainer -arrow- and remove the vacuum hose -1-.

Vehicles With 2.5L TFSI Engine 

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING [CNSB, CNTC] .

-- Remove the vacuum hose -2-.

-- Free Up The Vacuum Hose -1-, Pull It Out Of The Brake Booster Vacuum Pump And Remove It.

Continuation For All Engines: 

Courtesy of AUDI OF AMERICA, LLC

-- If installed, disconnect the connector -1- from the Vacuum Sensor -G608-.

-- Carefully remove the vacuum hose -2- from the brake booster.