Check Valve, Removing And Installing: Installing
Install In Reverse Order Of Removal and Note The Following:
NOTE:
Clean the bolts and nuts before reusing.
Always replace self-locking nuts and bolts.
Always replace damaged nuts and bolts.
-- Bring the vacuum hose with the check valve into the installation position and insert.
NOTE:
For easier assembly, lightly dampen the check valve and the vacuum hose with some water (but not oil).
-- Install the engine cover. Refer to ENGINE COVER [CNSB, CNTC] / ENGINE COVER, REMOVING AND INSTALLING [CRUA, DEJA] .