Brake System Pressure Reservoir -VX70-, Pre-Bleeding: Procedure

-- Attach the bleeder bottle -2- to the Brake System Pressure Reservoir -VX70- with a suitable bleed hose.

Courtesy of AUDI OF AMERICA, LLC

-- Open the bleeder valve -arrow A-.

-- Fill with brake fluid until it comes out of the threaded hole -arrow B- free of bubbles.

-- Close the bleed valve.

-- Seal the threaded hole with a plug from the Assembly Part Set: 5Q0 698 311  .

-- Install the Brake System Pressure Reservoir -VX70-. Refer to BRAKE SYSTEM PRESSURE RESERVOIR -VX70-, REMOVING AND INSTALLING .