Charge Air Pressure Sensor -G31- / -G447-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
Replace the self-locking screws and the O-ring.
Clean the threaded holes for the charge air pressure sensor inside the supercharger housing with a thread tap before assembling.