LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> RS 7 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Transmission System (Gears & Shafts - Service Information - 7-Speed Dual Clutch - 0B5 - 2 Of 2)) >> 35 Gears, Shafts >> Input Shaft >> Input Shaft Ball Bearing, Replacing

Input Shaft Ball Bearing, Replacing

WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

All assembly work and tightening specifications are outlined in the "S tronic Transmission" repair information.

Description of the procedure. Refer to INPUT SHAFT SEAL, REPLACING .

scientia non olet · About LEMON Manuals