Dual Clutch, Installing: Notes
WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
Replace the O-ring and the circlip.
-- Clean the sealing surface on the clutch cover.
-- Turn the rectangular rings -B- on the hub and check for ease of movement and axial play.
NOTE:
If the rectangular rings do not move easily, then the dual clutch must not be installed.