Engine, Supporting In Installed Position
Special Tools And Workshop Equipment Required
- Engine Support Bridge :10-222A
- Engine Support Bridge - Spindle :10-222A/11
-- Remove the left and right foam block -arrow-.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
WARNING:
Fire hazards and risk of damage for a faulty engine cover.
- The engine cover must be always be installed before the hood is closed.
- The engine may neither be started nor driven without an engine cover.
-- Position the :10-222A on the left and right suspension strut towers as illustrated.
-- Engage the :10-222A/11 in the left and right engine lifting eyes.
-- Lightly pretension engine with spindles.
Assembling
Assembly is performed in the reverse order of disassembly, noting the following:
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
WARNING:
Fire hazards and risk of damage for a faulty engine cover.
- The engine cover must be always be installed before the hood is closed.
- The engine may neither be started nor driven without an engine cover.