Charge Air Pressure Sensor 2 -G447-, REMOVING AND INSTALLING: Removing
NOTE:
Follow all the rules of cleanliness. Refer to CLEAN WORKING CONDITIONS .
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
WARNING:
Fire hazards and risk of damage for a faulty engine cover.
- The engine cover must be always be installed before the hood is closed.
- The engine may neither be started nor driven without an engine cover.
-- Disconnect the connector -2-.
-- Remove the bolts -1- and then remove the Charge Air Pressure Sensor 2 -G447-.