Leak Detection Pump, Removing And Installing: Removing

-- Follow all safety precautions. Refer to SAFETY PRECAUTIONS .

-- Follow the guidelines for clean working conditions. Refer to CLEAN WORKING CONDITIONS .

-- Remove the rear left underbody trim panel. Refer to UNDERBODY TRIM PANEL . .

-- Remove the EVAP canister. Refer to EVAP CANISTER, REMOVING AND INSTALLING .

-- Loosen the clamp and remove the breather line -2-.

-- Remove the bolts -1-.

-- Remove the Fuel Tank Leak Detection Control Module -J909- -3- from the EVAP canister in direction of -arrow-.