EVAP Canister, Removing And Installing, Except AUDI A6 Hybrid: Removing

-- Follow all safety precautions. Refer to SAFETY PRECAUTIONS .

-- Follow the guidelines for clean working conditions. Refer to CLEAN WORKING CONDITIONS .

-- Remove the rear left underbody trim panel. Refer to UNDERBODY TRIM PANEL . .

-- Remove the breather line -1-. Disconnect the connector couplings. Refer to CONNECTOR COUPLINGS, SEPARATING .

-- Disconnect the ventilation line -3- to the fuel tank. Disconnect the connector couplings. Refer to CONNECTOR COUPLINGS, SEPARATING .

-- Remove the breather line -5- to the EVAP Canister Purge Regulator Valve 1 -N80-. Disconnect the connector couplings. Refer to CONNECTOR COUPLINGS, SEPARATING .

-- Remove the bolts -2, 4 and 6- and remove the EVAP canister.