LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> RS 3 >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Passenger Protection, Airbags, Seat Belts -- (Sedan) >> 69 Passenger Protection, Airbags, Seat Belts >> Passenger Occupant Detection System >> Passenger Occupant Detection System, Removing And Installing >> Notes

Passenger Occupant Detection System, Removing And Installing: Notes

NOTE:

The passenger occupant detection system is only installed in the passenger seat.

WARNING:

The replacement part (Service Kit) for the passenger occupant detection system (market-specific version) is already pre-installed. Never disconnect the connector between the Passenger Occupant Detection System Control Module -J706- and the Front Passenger Occupant Detection Sensor -G128-. The service kit differs depending on the seat version and consists of:

  • Seat cushion with/without a seat heating element
  • Front Passenger Occupant Detection Sensor -G128- attached to the seat cushion
  • Passenger Occupant Detection System Control Module -J706-
scientia non olet · About LEMON Manuals