Overview - Airbag Control Module
- Airbag Control Module -J234-
- Removing and Installing. Refer to Airbag Control Module -J234-, REMOVING AND INSTALLING .
- The control module is grounded via the housing with the body.
- Nut
- 9 Nm
- The thread must be free of paint and contaminants, nut and ground pins serve as the ground connection for the control module
- Nut
- 9 Nm
- Quantity: 2
- The thread must be free of paint and contaminants, nut and ground pins serve as the ground connection for the control module
- Connector