LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> RS 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (GENERIC SCAN TOOL [CNTA, CNTC, CNSB] (4 Of 5) -- (A3 SEDAN)) >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Modes 01 - 0A >> Diagnostic Mode 03 - Read DTC Memory >> P Codes

P Codes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A3 Quattro, 2017 Audi A3 Quattro, 2016 Audi A3 Quattro, 2016 Audi A3, and 2015 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Component group
P x x x x DTC for the drivetrain
Norm - Code
P 0 x x x Trouble codes defined by SAE with specified malfunction texts
P 1 x x x Additional emission relevant DTCs provided by the manufacturer
P 2 x x x DTCs defined by SAE with specified texts, from MY 2000
P 3 x x x Additional emission relevant DTCs provided by the manufacturer from MY 2000
Component group
Repair group
P x 0 x x Fuel and air mixture and additional emission regulations
P x 1 x x Fuel and air ratios
P x 2 x x Fuel and air ratios
P x 3 x x Ignition system
P x 4 x x Additional exhaust system
P x 5 x x Speed and idle control
P x 6 x x Control module and output signals
P x 7 x x Transmission
P x 8 x x Transmission
P x 9 x x Control modules, input and output signals