Toothed Belt, Removing From Camshaft: Assembling
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
The rest of the assembly is performed in reverse order of removal, noting the following:
- Replace the seals.
-- Tighten the crankshaft holder -1-.
-- Install the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .
-- Install the upper toothed belt guard. Refer to UPPER TOOTHED BELT GUARD, REMOVING AND INSTALLING .