Charge Air System, Checking For Leaks

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2018 Audi S3, 2018 Audi A3 Quattro, 2017 Audi S3, 2017 Audi A3 Quattro, and 2016 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Turbo System Tester Kit: VAG1687

Fig 1: Identifying Turbo System Tester Kit
Courtesy of AUDI OF AMERICA, LLC

Procedure

-- Loosen the hose clamps -1 and 2- and remove the air duct pipe.

Fig 2: Identifying Clamps With Air Guide Pipe

Courtesy of AUDI OF AMERICA, LLC

-- Connect the : VAG1687/10 with the : VAG1687/14 to the turbocharger.

Fig 3: Identifying Turbocharger Testing Unit

Courtesy of AUDI OF AMERICA, LLC

-- Connect the : VAG1687 to the adapter.

All additional procedures are described. Refer to CHARGE AIR SYSTEM, CHECKING FOR LEAKS .

Tightening Specifications

Refer to OVERVIEW - CHARGE AIR HOSE CONNECTIONS .