LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> RS 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 229 (Turbocharger, Supercharger 2.0L (CNSB, CNTC, CYFB, DJJA)) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Cooler, Removing And Installing >> Installing

Charge Air Cooler, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2018 Audi S3, 2018 Audi A3 Quattro, 2017 Audi S3, 2017 Audi A3 Quattro, and 2016 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

If there are small impressions on the slats. Refer to RADIATOR AND CONDENSER ASSEMBLY .

Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.

-- Install the radiator. Refer to RADIATOR, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals