Engine Support, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
-- Vehicles with a left auxiliary radiator: remove the filler tube and the washer fluid reservoir -1-. Refer to WINDSHIELD WASHER SYSTEM .
-- Lift the engine using the :10-222A/11 -1- to dimension -a-.
- Dimension -a- = approximately 30 mm.
-- Remove the bolts -1, 2 and 3- and the engine support.