Vibration Damper, Removing And Installing: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Counterhold - Vibration Damper:T10355
Wrench - 21mm:T40263
Adapter:T40314
Vibration Damper Assembly Tool:T10531

Individual Components of the Vibration Damper Assembly Tool:T10531 :

Vibration Damper Assembly Tool - Counterhold Tool:T10531/1
Vibration Damper Assembly Tool - Tensioning Pins:T10531/2
Vibration Damper Assembly Tool - Turning Over Tool:T10531/3
Vibration Damper Assembly Tool - Knurled Nut:T10531/4

The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt the chain sprocket must be secured to the crankshaft as described as follows.

Courtesy of AUDI OF AMERICA, LLC