Reducing Agent Tank, Draining: Procedure
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Reducing agent tank, removing and installing. Refer to REDUCING AGENT TANK, REMOVING AND INSTALLING .
-- Drain the reducing agent tank by the filler neck into a suitable drip tray.
After Filling, the Following Steps Must Be Performed.
-- Adapt the SCR adaptation values after draining the reducing agent or replacing components. Refer to SCR ADAPTATION VALUES, RESETTING .