Reducing Agent Delivery Module, Removing And Installing: Removing
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
The reducing agent tank must be removed to drain the reducing agent.
-- Remove the reducing agent tank. Refer to REDUCING AGENT TANK, REMOVING AND INSTALLING .
-- Place the reducing agent tank on a clean surface.
-- While doing so, the delivery module must face upward.
-- Clean the area around the delivery module -5-.
-- Remove the bolts -arrows-.
-- Pry out the delivery module -5- from the opening -4- with a flat-head screwdriver.
-- Remove the delivery module from the reducing agent tank.