Overview - Reducing Agent Injector -N474-
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Reducing Agent Injector -N474-
- Removing and installing. Refer to REDUCING AGENT INJECTOR -N474-, REMOVING AND INSTALLING .
- Clamp
- Coolant Line
- Connection diagram. Refer to COOLANT HOSE CONNECTION DIAGRAM .
- Coolant Line
- Connection diagram. Refer to COOLANT HOSE CONNECTION DIAGRAM .
- Emissions Control Module
- Overview. Refer to OVERVIEW - EMISSIONS CONTROL SYSTEM .
- Removing and installing. Refer to EMISSIONS CONTROL MODULE, REMOVING AND INSTALLING .
- Bolt
- 5 Nm
- Always Replace After Removing
- Screw-Type Clamp
- 5 Nm
- Always Replace After Removing
- Rubber Ring
- Seal
- Always Replace After Removing