Exhaust Gas Temperature Sensor 2 -G448-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
- Follow the safety precautions when working on the exhaust system. Refer to SAFETY PRECAUTIONS WHEN WORKING ON EXHAUST SYSTEM .
- Do not cut the wire connection.
-- Disconnect the connector -3- and free up the wire.
Vehicles Without SCR System:
-- Remove the Exhaust Gas Temperature Sensor 2 -G448- -arrow-.
Vehicles With SCR System:
-- Remove the NOx Sensor -G295-. Refer to NOx SENSOR -G295-, REMOVING AND INSTALLING .
-- Free up the wiring harness.
-- It may be necessary for space that the clamp -1- be loosened and turned.
-- Remove the Exhaust Gas Temperature Sensor 2 -G448- -arrow-.