Exhaust Door Control Unit -J883-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Follow the safety precautions when working on the exhaust system. Refer to SAFETY PRECAUTIONS WHEN WORKING ON EXHAUST SYSTEM .
-- If equipped, remove the rear noise insulation -1-. Refer to NOISE INSULATION, REMOVING AND INSTALLING / OVERVIEW - NOISE INSULATION .
-- Disconnect the connector -1-.
-- Remove the bolts -arrows-, and remove the Exhaust Door Control Unit -J883-.