Overview - Engine Oil Cooler

Fig 1: Engine Oil Cooler Exploded View

Courtesy of AUDI OF AMERICA, LLC

Sub-Assembly Bracket
- Removing and installing. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .
Seal
- Always replace after removing
O-rings
- Always replace after removing
- Coat with engine oil
Mechanical Switch Valve
- Removing and installing. Refer to MECHANICAL SWITCH VALVE, REMOVING AND INSTALLING .
Engine Oil Cooler
- See note. Refer to OVERVIEW - OIL PAN/OIL PUMP .
- Removing and installing. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .
Seal
- Always replace after removing
- Coat with coolant
Connection
Bolt
- 8 Nm +45°
- Always replace after removing