Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING: Removing

-- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .

Rest of World Market Version: 

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Loosen the hose clamp -arrow- and remove the air duct hose.

Fig 1: Loosen Hose Clamp And Remove Air Guide Hose

Courtesy of AUDI OF AMERICA, LLC

RS3 North America Market-Specific Versions: 

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and air duct -1-.

Continuation for All Vehicles: 

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

-- Remove the bolt -1- and the Charge Air Pressure Sensor -G31-. (Depending on the version also two bolts).