LEMON Manuals: Even more car manuals for everyone

Home >> Audi >> 2017 >> RS 3 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers -- (A3 Sedan) >> 63 Bumpers >> Rear Bumper >> Overview - Bumper Cover >> Overview - Bumper Cover, A3 And SPORTBACK Through My 2016 >> Bumper Cover Side Mount - Tightening Specification And Sequence

Bumper Cover Side Mount - Tightening Specification And Sequence

GWWA63-10617

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts and nuts in the order shown.

Bolts -1 through 4- to 3 Nm.
Nut -5- : 2.5 Nm.

scientia non olet · About LEMON Manuals