Overview - Bumper Cover, RS3 SPORTBACK
- Bolt
- 2 Nm
- Quantity: 3
- Bumper Cover End Plate
- Removing and Installing. Refer to FRONT BUMPER COVER END PLATE, REMOVING AND INSTALLING, RS3 SPORTBACK .
- Spoiler Lower Section
- Removing and Installing. Refer to SPOILER LOWER SECTION, REMOVING AND INSTALLING, RS3 SPORTBACK .
- Towing Eye Cover
- Lower Reinforcement Brace
- Removing and Installing. Refer to LOWER REINFORCEMENT BRACE, REMOVING AND INSTALLING, RS3 SPORTBACK .
- Bolt
- 2 Nm
- Quantity: 8
- Lower Molded Foam Part
- Removing and Installing. Refer to FRONT BUMPER COVER END PLATE, REMOVING AND INSTALLING, RS3 SPORTBACK .
- Side Molded Foam Piece
- Removing and Installing. Refer to FRONT BUMPER COVER END PLATE, REMOVING AND INSTALLING, RS3 SPORTBACK .
- Molded Foam Part
- Removing and Installing. Refer to MOLDED FOAM PART, REMOVING AND INSTALLING, RS3 .
- Bolt
- 2 Nm
- Clip
- Quantity: 6
- Cover
- For the air intake grille
- Removing and Installing. Refer to AIR INTAKE GRILLE TRIM, REMOVING AND INSTALLING, RS3 SPORTBACK .
- Trim
- For the side air intake
- Removing and Installing. Refer to SIDE AIR INTAKE TRIM, REMOVING AND INSTALLING, RS3 SPORTBACK .
- Thread Mount
- For the bolt
- Bolt
- 4 Nm
- Bolt
- 2 Nm
- Bumper Cover
- Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
- Bolt
- 2 Nm
- Washer Nozzle Cover
- For the headlamp washer system
- Removing and Installing. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING .
- Air Intake Grille
- There are different versions.
- Removing and Installing. Refer to AIR INTAKE GRILLE, REMOVING AND INSTALLING, RS3 SPORTBACK .
- Bolt
- 2 Nm
- Quantity: 2