Side Air Intake Trim, Removing And Installing, RS3 Sedan: Removing

-- Remove the air intake grille trim. Refer to AIR INTAKE GRILLE TRIM, REMOVING AND INSTALLING, RS3 SEDAN .

-- Free up the washer fluid hose -5-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the expanding rivets -1 and 2-.

-- Release the catches -3- and remove the trim -4- toward the inside.

-- Remove the expanding rivets -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

-- Carefully warm the mount -3- using a :VAG1416  .

-- Carefully loosen the bonding -arrows- and at the same time remove the mount.

-- Carefully remove the clips -2- from the guide tab with a screwdriver.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -3 and 4-.

-- Release the retainer -arrow- and remove the trim -1- from the bumper cover.