Vibration Damper, Removing And Installing: Notes

Special tools and workshop equipment required 

• Counterhold - Vibration Damper :T10355 
• Wrench - 21mm :T40263 
• Adapter :T40314 
• Vibration Damper Assembly Tool :T10531 

Individual Components of the Vibration Damper Assembly Tool :T10531  :

• Vibration Damper Assembly Tool - Counterhold Tool :T10531/1 
• Vibration Damper Assembly Tool - Tensioning Pins :T10531/2 
• Vibration Damper Assembly Tool - Turning Over Tool :T10531/3 
• Vibration Damper Assembly Tool - Knurled Nut :T10531/4 

• The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt the chain sprocket must be secured to the crankshaft as described as follows.

  Courtesy of AUDI OF AMERICA, LLC