Headrest Cover And Cushion, Removing And Installing: Installing
-- Insert cushion -1- with proper fit in cover -2-.
-- Insert headrest support in the cushion with cover.
-- Close the main zipper by moving the upper cover flat channel -1- over the cover -2-.
-- Push the edge of the material with the flat channel into the U-channel -5-.
-- Closing the side locks is similar to the closing the main lock.
-- After closing the main zipper and the side zippers with a needle or other pointed object, line up the cover and the profiles.
-- Make sure the cover lies on the cushion -3- without any wrinkles and without seam markings.
Install in reverse order of removal.