Charge Air Pressure Sensor -G31-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2016 Audi Q3 Quattro, 2016 Audi Q3, 2015 Audi Q3 Quattro, and 2015 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bolts -arrows- and remove the air guide with the air guide pipe -1-.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Disconnect the connector -2-.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Remove the bolts -1- and remove the Charge Air Pressure Sensor -G31- from the air guide pipe.