LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> Q3 Premium >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Crankshaft & Cylinder Block (Ea 888 Generation II) (2017 - 2018) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Sealing Flange, Removing And Installing, Transmission Side >> Transmission Side Sealing Flange, Removing And Installing, Version B (Oil Side Sealing Lip) >> Removing

Transmission Side Sealing Flange, Removing And Installing, Version B (Oil Side Sealing Lip): Removing

-- Remove the dual mass flywheel (refer to FLYWHEEL, REMOVING AND INSTALLING ) or the drive plate (refer to DRIVE PLATE, REMOVING AND INSTALLING ).

-- Unhook the intermediate plate from the sealing flange and at the alignment sleeves -arrows-.

GWWN13-10562Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 8-.

GWWA13-10509Courtesy of AUDI OF AMERICA, LLC

-- Pry out the sealing flange.