Part I - Engine Codes BPU, BYT, BZB Only
Part I. Refer to Part I - All Engines excluding Engine Codes BPU, BYT, BZB .
Part II. Refer to Part II .
Part III. Refer to Part III .
- Turbocharger
- Can be replaced only with the exhaust manifold
- Removing and installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
- To the EVAP Canister
- Turbocharger Vacuum Diaphragm
- Checking. Refer to Vehicle Diagnostic Tester and TURBOCHARGER VACUUM DIAPHRAGM, CHECKING .
- Adjusting. Refer to TURBOCHARGER VACUUM DIAPHRAGM, ADJUSTING .
- Removing and installing. Refer to TURBOCHARGER VACUUM DIAPHRAGM, REPLACING .
- Seal
- Always replace after removing.
- Nipple
- Banjo Bolt
- 8 Nm
- Hose
- Hose
- Bolt
- 3 Nm
- Wastegate Bypass Regulator Valve -N75-
- Hose
- Seal
- Always replace after removing.
- Connection
- Clip
- Bolt
- 9 Nm
- Bolt
- 7 Nm
- Turbocharger Recirculation Valve -N249-
- Note the installation position. Refer to Figure.
- Seal
- Always replace after removing.