Overview - Cover And Cushion, Backrest With A Pass-Through

Fig 1: Exploded View Of Cover And Cushion (Backrest With A Pass-Through)

Courtesy of AUDI OF AMERICA, LLC

1. Backrest Cover
   • Backrest cover and cushion, removing and installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, BACKREST .
   • Backrest cover and cushion, separating and assembling. Refer to COVER AND CUSHION, SEPARATING, BACKREST .
   • Allocation. Refer to the parts information .
   • Make sure there are no folds after installing
2. Wire
   • Embedded in the foam of the backrest cushion
   • For attachment of backrest cover to backrest cushion
3. Contour Strip
   • Sewn into backrest cover
   • For attachment of backrest cover to backrest cushion
4. Upholstery Clip
   • For attachment of backrest cover to backrest cushion
   • Replace
   • Install at the same location with Upholstery Clip Pliers:VAG1634  .
5. Backrest Frame
   • Removing and installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, BACKREST .
6. Backrest Cushion
   • Backrest cover and cushion, removing and installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, BACKREST .
   • Backrest cover and cushion, separating and assembling. Refer to COVER AND CUSHION, SEPARATING, BACKREST .
   • Allocation. Refer to the parts information .
7. Clamping Strip
   • Sewn into backrest cover
   • For attaching the backrest cover on the backrest frame