Part IV - 1.8L Engine Only
WARNING: This page is about a different car, the 2016 Audi Q3 Quattro, 2016 Audi Q3, 2015 Audi Q3 Quattro, and 2015 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Part I. Refer to Part I .
Part II. Refer to Part II .
Part III. Refer to Part III .
- Turbocharger
- Can only be replaced with exhaust manifold and vacuum diaphragm.
- Removing and installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
- Turbocharger Vacuum Diaphragm
- Checking. Refer to TURBOCHARGER VACUUM DIAPHRAGM, CHECKING .
- Removing and installing. Refer to TURBOCHARGER VACUUM DIAPHRAGM, REPLACING, 1.8L ENGINE ONLY .
- Adjusting. Refer to TURBOCHARGER VACUUM DIAPHRAGM, ADJUSTING, 1.8L ENGINE ONLY .
- Bolt
- 10 Nm
- Nut
- 9 Nm
- Secure with sealing wax; sealing wax. Refer to the parts information.
- Locking Plate
- Always replace
- Knurled Nut
Additional Tightening Specifications
| Component | Nm |
|---|---|
| Right air guide pipe to the oil pan | 10 |
| Air guide pipe to bracket | 10 |