Overview - Ignition System
WARNING: This page is about a different car, the 2016 Audi Q3 Quattro, 2016 Audi Q3, 2015 Audi Q3 Quattro, and 2015 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 20 Nm
- Tightening specifications affect function of Knock Sensor (KS)
- Knock Sensor 1 -G61-
- Contacts gold plated
- Removing and installing. Refer to KNOCK SENSOR, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Camshaft Position Sensor -G40-
- Removing and installing. Refer to CAMSHAFT POSITION SENSOR, REMOVING AND INSTALLING .
- O-Ring
- Always replace
- Ignition Coil with Power Output Stage
- Ignition Coil 1 with Power Output Stage -N70-
- Ignition Coil 2 with Power Output Stage -N127-
- Ignition Coil 3 with Power Output Stage -N291-
- Ignition Coil 4 with Power Output Stage -N292-
- Removing and installing. Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .
- Spark Plug
- Removing and installing, and tightening specifications.
- O-Ring
- Always replace
- Engine Speed Sensor -G28-
- Removing and installing. Refer to Engine Speed Sensor -G28-, REMOVING AND INSTALLING .
- Bolt
- 4.5 Nm