Cylinder Head, Removing And Installing: Notes
WARNING: This page is about a different car, the 2016 Audi Q3 Quattro, 2016 Audi Q3, 2015 Audi Q3 Quattro, and 2015 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Central Valve Assembly Tool :T10352
- Counterhold - Vibration Damper :T10355
- Locking Pin (3 pc.) :T40011
- Chain Tensioner Lever :T40243
- Tensioner Locking Tool :T40267
- Camshaft Locks :T40271
- Engine Bung Set :VAS6122
- Polydrive Bit Drive Socket :T10070
- Socket - Xzn 12 :T40270
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Cylinder head
- Gasket - Cylinder head