Tightening Specifications
WARNING: This page is about a different car, the 2016 Audi Q3 Quattro, 2016 Audi Q3, 2015 Audi Q3 Quattro, and 2015 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Always replace the intermediate sprocket. Otherwise the backlash will not adjust itself and it could result in engine damage.
The new intermediate sprocket has an anti-friction coating that wears off after a short period of use, which automatically adjusts the backlash.
-- Tighten with a new bolt as follows:
-- Partially tighten to 10 Nm using a torque wrench.
-- Turn the intermediate sprocket.
The intermediate sprocket must not have any play. Loosen and tighten it again if necessary.
-- Tighten to 25 Nm using a torque wrench.
-- Turn another 90° using a rigid wrench.