Camshaft Timing Chain, Removing And Installing: Notes
WARNING: This page is about a different car, the 2016 Audi Q3 Quattro, 2016 Audi Q3, 2015 Audi Q3 Quattro, and 2015 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Assembly Tool :T10352
- Assembly Tool :T10352/2
- Counterhold - Vibration Damper :T10355
- Locking Pin (3 pc.) :T40011
- Chain Tensioner Lever :T40243
- Tensioner Locking Tool :T40267
- Camshaft Locks :T40271
Special tools and workshop equipment required
- Assembly Tool :T10531
Individual components of the Assembly Tool :T10531 :
- Mount :T10531/1
- Tensioning Pins :T10531/2
- Turning Over Tool :T10531/3
- Collar Nut :T10531/4
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bolt - Bearing bracket