Valve Stem Seals, Removing And Installing, Cylinder Head Removed: Notes

Special tools and workshop equipment required 

• Puller - Valve Seal: 3364 
• Seal Installer - Valve Stem: 3365  for valve stem seal with a simple sealing lip. Refer to Figure.
• Seal Installer - Valve Stem: T40376/1  , for valve stem seal with a double sealing lip. Refer to Figure.
• Valve Keeper Tool Kit: VAS 5161A 
• Valve Keeper Tool Kit Pressure Fork with Lever for Assembly Cartridge: VAS5161/2 
• Valve Cotter Tool Kit - Punch: VAS5161/3A 
• Guide Forks M6/M8 with Threaded Studs: VAS5161/5 
• Retainer: VAS5161/6 
• Valve Cotter Tool Kit - Assembly Cartridge: VAS5161/8A 
• Knurled Thumb Screws M6: VAS5161A/12 
• Valve Cotter Tool Kit - Valve Insertion Device: VAS5161/18 
• Valve Cotter Tool Kit - Guide Plate 19c: VAS5161/19C 
• Engine and Transmission Holder: VAS6095A 
• Cylinder Head Tensioning Device: VAS6419 
• Mounting Sleeve. Refer to parts information